Minimum Order Quantity | 1 Unit |
Installation Type | Prefabricated |
Capacity (KLD) | 1 KLD - 4 KLD |
Inlet Flow Rate(m3/day) | 50 m3/day |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Plant Type | Effluent Treatment Plant |
Material Of Construction | Mild Steel |
Water Source | Commercial Waste Water |
Control Module | Available |
Automation Grade | Semi-Automatic |
Deliver Type | PAN India |
Treatment Stages | Secondary Treatment, Primary Treatment |
Warranty | 1 Year |
I Deal In | New Only |
Reduction of Dry Matter | Industrial |
Country of Origin | Made in India |
Power | 11.3kW |
A waste water treatment plant cleans sewage and water so that they can be returned to the environment. These plants remove solids and pollutants, break down organic matter and restore the oxygen content of treated water. They achieve these results through four sets of operations: preliminary, primary, secondary and sludge treatments. Normally, a network of sewers connected to homes, commercial buildings, schools and street grates delivers waste water and solids to a treatment plant's collection tanks and basins in a never-ending flow.
The Activated Sludge Process (ASP) is a sewage treatment process in which air or oxygen is blown into raw, unsettled sewage to smash the solids and develop a biological 'soup' which digests the organic content and pollutants in the sewage. These plants do not have a primary settlement chamber which is the chamber that needs emptying by tanker on a regular basis with most three stage sewage treatment plants.
Pretreatment Phase
Waste water plants remove the 'easy pickings' during the pretreatment phase. A set of bar screens rakes away large items such as tree limbs, garbage, leaves, cans, rags, plastic bottles, diapers and other waste materials. In many plants, equalization basins and grit chambers of various types regulate the rate of water inflow so that stones, sand and glass settle out. The basins hold sewage until it is ready for treatment and handle overflows due to heavy rains. Some plants skim grease and fats off the surface of the water during pretreatment, sometimes using air blowers to whip the oily material into a froth for easier removal. Other plants remove grease during primary treatment.
Primary Treatment
After pretreatment, the waste water collects in primary clarifiers, which are large basins and sedimentation tanks. Gravity allows smaller particles to settle out. Mechanically driven scrapers collect solid matter and direct it to hoppers connected to the sludge treatment equipment. If the plant didn’t remove grease and oil during pretreatment, it does so in this phase using surface skimmers. Some plants use equipment to saponify collected fats by mixing them with lye, thereby producing soaps and glycerol.
Secondary Treatment
In the next phase, plants aerate and agitate the waste water in secondary basins, adding beneficial microorganisms to break down organic matter into sludge. Plants employ a number of alternative strategies to break down sludge. For example, plants can culture a mass of microbes and pass the waste material over the biofilm. Other plants mix the biomass with waste material, creating activated sludge that can be recycled for reuse. The resulting biological floc removes carbon and nitrogen from organic wastes. Oxidation can occur on the surface—in lagoons—or in filter beds containing coked coal and limestone. Some facilities construct wetlands and reed beds that decompose organic materials. Other technologies used include membrane bioreactors and biological aerated filters. The resulting waste water collects and settles in a secondary clarifier tank. The common names of the etp and wwtp plants are also called as in this manner as mentioned below wastewater treatment plant, effluent treatment plant, etp plant, industrial effluent treatment plant, sewage treatment plant, wastewater treatment plant process,pharmaceutical wastewater treatment plant, Wastewater Treatment Plant Effluent, wwtp plant, effluent treatment and wastewater treatment plant, Sewage and effluent treatment plant, wastewater treatment effluent plant, effluent wastewater treatment plant, effluent waste treatment plant, effluent treatment and wastewater treatment, effluent treatment plant and wastewater treatment
Minimum Order Quantity | 1 Piece |
Capacity (KLD) | 50 KLD |
Air Blower Count | 2 Blowers |
Inlet Flow Rate(m3/day) | 50 m3/day |
Delivery Location | Pan India |
Treatment Technique | Fluidized Aerated Reactor |
Material Of Construction | Mild Steel |
Control Module | Control Module Unavailable |
Installation Type | Prefabricated |
Automation Grade | Semi-Automatic |
Treatment Stages | Secondary Treatment |
Industry | Pharmaceutical Industry |
Country of Origin | Made in India |
Minimum Order Quantity | 1 piece |
Installation Type | Prefabricated |
Capacity (KLD) | 100 KLD |
Application Industry | Sugar Industry |
Inlet Flow Rate(m3/day) | 100 m3/day |
Air Blower Count | 2 Blowers |
Air Blower Power | 0.4 KW |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Water Source | Commercial Waste Water |
Control Module | Available |
Deliver Type | PAN India |
Warranty | 1 Year |
I Deal In | New Only |
Automation Grade | Semi-Automatic |
Plant Type | Wastewater Treatment Plant |
Treatment Stages | Secondary Treatment |
Country of Origin | Made in India |
Minimum Order Quantity | 1 piece |
Capacity (KLD) | 50 KLD |
Air Blower Count | 2 Blowers |
Inlet Flow Rate(m3/day) | 50 m3/day |
Air Blower Power | 0.4 KW |
Automation Grade | Automatic |
Material Of Construction | Mild Steel |
Treatment Technique | Mixed Bed Bio Reactor |
Water Source | Industrial Effluent |
Control Module | Available |
Installation Type | Containerized Plug & Play |
Treatment Stages | Primary Treatment, Secondary Treatment |
Industry | Chemical/Petroleum Industry |
Country of Origin | Made in India |
4.1/5
Reviewed by 19 Users
Most Relevant Reviews