Water Filtration Plant

Color Removal Filter is often caused by dissolved organic matter, e.g. humic and fulvic acids (organic decomposition products from vegetation).

Specifications:
Flow Rate 2-250 m3/H
Style Vertical
Connect Method Flange

• Item Code: WTP-006

Color Removal Filter is often caused by dissolved organic matter, e.g. humic and fulvic acids (organic decomposition products from vegetation)

specifications:

• Working pressure: ≤ 0.6 Mpa
• Flushing filter head loss: 0.8
• Water outlet: 2-5 mg/L

Carbon has properties of both physical and chemical adsorption, selecting and adsorbing matter small and macro molecular in liquid phase to do function of crocking, refining deodorization, sterilization, decontamination and purification.
Specifications

Material Polypropylene cover plate

Salt Rejection Rate 98.5%

Type Carbon Water Purification System

Being the preferred choice of our customers, we are engaged in providing an enormous quality range of Chloride Removal Plant to our clients.

Specifications:

• Process: Pre-treatment & Ro+UF part
• Recovery efficiency: 60%-75%
• Capacity: 50 T/Hr
• Material: Stainless steel or Fiber glass
• Desalination: 99%
• Capacity: 250 LPH TO 10000 LPH
• Installation Service:Yes

Fabricated as per the set business standards and rule, nature of this Carbon Filter for Chemical Industry is known not profoundly institutionalized.

Specifications:

• Efficiency: F9
• Material: Activated Carbon Granule
• Frame: Alloy

Multi Grade Sand Filter also consist of a vertical or horizontal pressure vessel with a set of frontal pipe work and valves, media consist of different sizes and grade mixed and supported by layers of pebbles and gravels, a top distributor to distribute the incoming water uniformly throughout the cross section of the filter and an under drain system to collect filtered water.

 

Specifications:

• Material: Carbon steel, stainless steel
• Largest diameter of partical separation: 1.5/2/3/6/10/16 mm
• Average remove rate: 92%-96%
• Working pressure: 1.0 Mpa, 1.6 Mpa, 2.0 Mpa, 2.5 Mpa
• Control: Automatic control box, PLC, or manual
• Face pipe lines: Carbon steel, SS304/316
• Filtering material: Quartz sand, manganese

Chemical Filter comprises of precision fabricated range of Electroplating Chemical Filters that are especially developed so as to successfully match up to the requirements of filtration process being utilized in electroplating solutions.

 

Specifications:

• Input and output air pressure loss: ≤0.01 MPa
• Ambient temperature: ≤45 ºC
• Gas-liquid separation efficiency: 99.9%

 

Media Filter is manufactured using superior quality raw materials, which are sourced from the most trusted and reliable vendors in the industry.

Specifications:

• Filter Medium Material: Activated Carbon
• Color: Green
• Material: Stainless Steel, Steel, Plastic

Media Filter are manufactured using superior quality raw materials, which are sourced from the most trusted and reliable vendors in the industry.

 

Specifications:

• Style: Vertical
• Inlet-Outlet Diameter: 1.5 Inch
• Inlet Pressure: 0.2-0.6 MPa

 

We are Leading manufacturer and supplier of Water Filtering System set up.

Specifications:

• Weight: 1600 kg
• RO Power: 4.0 kW
• Size: 2600x900x2300 mm

Silica Filter sand is an extremely effective filter media because of its ability to hold back precipitates containing impurities. Filter sand size, angularity and hardness are the important filter sand characteristics to ensure proper filtering. Products meet or exceed the NSF/ANSI Standard 61 for Drinking Water System Components, as well as AWWA Standard B100-01.

Specifications:

• Effective Sizes: 20 mm - 2.5 mm
• Uniform Coefficient: 1.3 - 1.7
• Specific Gravity: 2.67
• Moh's Hardness: 7
• Density: 105 - 115 lbs per cubic foot

• Item Code: WTP-037

Multigrade Sand Filter also consist of a vertical or horizontal pressure vessel with a set of frontal pipe work and valves, media consist of different sizes and grade mixed and supported by layers of pebbles and gravels, a top distributor to distribute the incoming water uniformly throughout the cross section of the filter, and an under drain system to collect filtered water.

Specifications:

• Pressure Loss: Less Than 0.02%
• Water Flowing Speed: 10 -15 M/Hour
• Flow Rate: 38 Ton Per Hour

• Item Code: WTP-022

Pressure Sand Filter consists of a pressure vessel-this could be either vertical or horizontal-fitted with a set of frontal pipe work and valves, graded silica quartz sand supported by layers of graded under bed consisting of pebbles and gravels, a top distributor to distribute the incoming water uniformly throughout the cross section of the filter, and an under drain system to collect filtered water.

Specifications:

• Water outlet: <2 mg/L
• Design temperature: 5 ~ 4000 C
• Single sand filter Height: 700 mm (height for circulating water sand filter 500 mm)
• Backwash swelling degree: 40 ~ 50%

• Item Code: WTP-025

Pressure Sand Filter consists of a pressure vessel-this could be either vertical or horizontal-fitted with a set of frontal pipe work and valves, graded silica quartz sand supported by layers of graded under bed consisting of pebbles and gravels, a top distributor to distribute the incoming water uniformly throughout the cross section of the filter, and an under drain system to collect filtered water.

 

Specifications:

• Average Remove Rate: 92%-96%
• Flow Rate: 115~190 m3/H
• Inlet Pressure: 0.2-0.6 MPa

 

Hydro Flux Engineering offers a wide range of dual media filters like Pressure Sand Filters and Activated Carbon Filters.

 

Specifications:

• Design Pressure: 7.5-16 Bar
• Flow Rate: 2-250 m3/H
• Equipment Chamber Material: Carbon Steel/ Stainless Steel

 

Our clients can avail from us quality approved assortment of Activated Carbon Filter.

Specifications:

• Filter speed: 11-15 m3
• Inlet water tuibidity: <=10 mg/L
• Material: Stainless Steel

Other Details:

• Activated Carbon filters are using for the Removal of Chlorine and Microorganisms thorough adsorption
• Definite grade of high quality activated carbon with specialized design of distribution and collection systems offers maximum efficiency of the removal of chlorine and ensuring long life in the carbon
• Activated carbon filtration is most effective in removing organic contaminants, chlorine etc
• Because organics are often responsible for taste, odor,and,color,problems
• ACF Unit is a FRP/MSRL vertical pressure vessel. Internally it is fitted with strainer on bottom collecting system
• The unit is fitted with SS frontal pipe work & MPV externally

• Item Code: WTP-001

Iron Removal Filter is manually operated, processed catalytic filtration unit where the raw water passes through the layer of compressed air, processed catalyst & quartz filter media respectively.

Specifications:

• Power Supply: AC 380 V, 35 A, 50 Hz
• Working Filtration Rate: 5-12 m/H and Max 15 m/H
• Working Pressure(MPa): 0.6~1.6 MPa

Iron Filters remove Iron, Sulphur and Manganese from water.

Specifications:

• Style: Vertical
• Input Power: 2~20 kW
• Material for Face Piping: Stainless Steel or PVC

• Item Code: WTP-019

Activated Carbon filters are using for the Removal of Chlorine and Microorganisms thorough adsorption.

 

Specifications:

• Processing Capacity(M3/H): 5-100
• Material: Carbon Steel
• Anti-Corrosive Treatment: Anti-Corrosive Paint

 

 

Understanding the demand of the clients, we are engaged in manufacturing, supplying and exporting superior quality Activated Carbon Filters to our customers.

Specifications:

• Efficiency: 40-80%
• Nominal pressure: 0.6, 1.0, 1.6, 2.5 Mpa
• Filtration precision: 0.1~8 mm or based on operating request

Iron removal filters are manually operated, processed catalytic filtration unit where the raw water passes through the layer of compressed air, processed catalyst & quartz filter media respectively.

 

Specifications:

• Material: Stainless steel, carbon steel
• Function: Iron and manganese removal
• Brand Name: Hydro Flux
• Working temperature: Room temperature stress at work

Iron Removal Filter is manually operated, processed catalytic filtration unit where the raw water passes through the layer of compressed air, processed catalyst & quartz filter media respectively.

 

Specifications:

• Tank Size: 2000x3100 mm
• Flow Rate: 30 m3/H
• Working Pressure: 0.6 MPa/1.0 MPa

Supported by a team of professionals, we provide optimum quality Industrial Activated Carbon Filter. Moreover, clients can purchase the offered filter from us at very affordable prices.

Specifications:

• Dimension(LxWxH): 400x300x20 mm
• Efficiency: 98%
• Construction: Panel Filter
• Filtration Grade: Pre Filter
• Length: 10-40 Inch

Hydro Flux Engineering offers a wide range of dual media filters like Pressure Sand Filters and Activated Carbon Filters.

Specifications:

Material Selection: Stainless Steel, Carbon Steel, Glass Fiber

Treatment Capacity: 3-70 t/H

Style: Tube

• Item Code: WTP-009

Hydro Flux Engineering offers a wide range of Dual Media Filter like Pressure Sand Filters and Activated Carbon Filters.

 

Specifications

• Sand filter Material: Carbon steel or stainless steel
• Water inlet pressure: 2.5-3 bar
• Connect Method: Flange
• Sand filter Seal Type: O-ring and Washer
• The key of filter effect: Water distribution and catchment technology